Filament Tiertime ABS Bridesmaid Pink

 

 

 

Description

 

The Tiertime UP ABS filament is a filament specifically designed for Tiertime 3D printers such as the X5 and the UP300. This filament is ideal for printing complex products and functional prototypes due to its excellent resistance and its high resistance to cold temperatures. This ABS filament can be welded and become smooth and shiny due to a chemical process based on acetone vapor. We recommend that you calibrate your nozzle temperatures from 260 to 275 °C for this plastic filament, the heatbed will ideally be set to 130 °C in order to avoid warping. These values given for information only have to be adjusted to guarantee an optimal result.

 

 

Compatible with

• Tiertime X5
• Tiertime UP300
• Tiertime UPmini2 ES
• Tiertime UPbox+
• Most 3D printers equipped with a heatbed

 

Available colors

White	Yellow	Green	Blue	Red	Black	Spring  Beige	Bridemaid Pink	Fairytale purple
Minty green	Iced aqua	Crystal sea	Breathless gray	California orange	Fiery coral	Treetop green	Skydriver cyan

 

 

 

 

 

 

Features of material

 

 

ABS (Acrylonitrile butadiene styrene ) is a thermoplastic polymer. It is often used in everyday products (remote controls, LEGOS etc ...). It begins to soften at 90 ° C and melt at 190 ° C. ABS is heat resistant and is quite flexible. It will be suitable for printing small, precise and mechanical parts due to its higher resistance to heat and impacts. The use of ABS requires the systematic use of a heatbed to limit the effects of shrinkage, the main defect of this material.

 

 ABS contains Styrene, which is emitted during melting in the form of fine particles, which can be dangerous for people with respiratory disorders and whose effects on humans are little known. As a precaution, we recommend you to use careened and filtered 3D printers in order to print in ABS, in dedicated empty spaces or spacious and ventilated place. Otherwise, please consider using the PLA filament, which does not present any known danger for the man until this day.

 

 

 

 

 

 

Available colors
in the range of ABS Tiertime filaments

 

 

 

 

 

 

Technical specifications

 

 

Properties	Metric	Imperial	ISO Standard
Tensile strength	30 MPa	4390 psi	ISO 527:1998
Breaking stress	31.5 MPa	4390 psi	ISO 527:1998
Elongation at Break	11.08 %	11.08 %	ISO 527:1998
Glass transition temperature	107.89 °C	223 °F	ISO 11357-3:2014
Shore hardness (D)	69.2	69.2	ISO 868:1998