Bambu Lab ABS-GF Filament
Bambu ABS-GF is a glass-fiber-reinforced ABS filament offering enhanced mechanical and aesthetic performance. Compared with conventional ABS, ABS-GF boasts greater strength, rigidity, heat resistance and dimensional stability, while being less prone to warping and distortion. Fiberglass gives it a smooth, matte finish with slight glossy flakes, softening layer lines. Thanks to its resistance to water and wear, its durability and its bright colors, ABS-GF is particularly well suited to mechanical parts and decorative elements.
Strength and Stiffness
ABS-GF outperforms conventional ABS in terms of strength and rigidity, making it ideal for load-bearing, flex-resistant parts.
Dimensional Stability
Glass fiber reinforcement gives ABS-GF greater dimensional stability than conventional ABS, minimizing warpage and distortion during printing. This makes it ideal for complex mechanical assemblies or geometric components.
Specimen Test: Model size (L*W*H): 240*50*20 mm³ (the XY direction); Infill Density: 25%
Fine Matte Finish
The smooth matte finish, combined with barely noticeable layer lines, gives ABS-GF a refined appearance, making it perfect for decorative and detailed parts.
Water Resistance & Built to Last
With enhanced water resistance and durability, Bambu ABS-GF is perfect for printing long-lasting production and household items such as mechanical enclosures, connectors, and molds.
Accessory Compatibility
| | Recommanded | Non Recommanded |
| Build Plate | Engineering Plate, High Temperature Plate or Textured PEI Plate | Cool Plate |
| Hotend | Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mm
| Hotend with Stainless Steel Nozzle (all size)
Hotend with Hardened Steel Nozzle (0.2 mm) |
Glue | Bambu Liquid Glue / Glue Stick | / |
HEX Code Table
Parameters Comparison
| | ABS | ABS-GF | PA6-CF |
| Composition | Acrylonitrile - butadiene - styrene | Acrylonitrile - butadiene - styrene,
glass fiber | PA6, glass fiber |
| Compatibilité de l'AMS | Yes | Yes | Yes |
Sécher avant l'utilisation | Recommanded | Recommanded | Required |
Vitesse d'impression | < 300 mm/s | < 180 mm/s | < 130 mm/s |
Type d'imprimante | Enclosure | Enclosure | Enclosure |
Résistance aux chocs (XY) | 39.3 kJ/m² | 14.5 kJ/m² | 27.2 kJ/m² |
Résistance à la flexion (XY) | 62 MPa | 68 MPa | 120 MPa |
Résistance à la flexion (Z) | 39 MPa | 46 MPa | 51 MPa |
Rigidité (module de flexion - XY) | 1880 MPa | 2860 MPa | 3670 MPa |
Adhésion de la couche (force d'impact - Z) | 7.4 kJ/m² | 5.3 kJ/m² | 4.1 kJ/m² |
Résistance à la chaleur (HDT, 0,45 MPa) | 87°C | 99°C | 182°C |
Taux d'absorption d'eau saturée/% （25 °C, 55% RH） | 0.65 | 0.53 | 2.56 |
RFID for smart printing
All print parameters are integrated into the RFID, which can be read via our AMS (Automatic Material System).
Load and print! No more tedious setup steps.
N°1 European E-Shop for 3D Printing and scanning
