Bambu Lab AMS 2 Pro - Upgraded Automatic Material Management System for your
Bambu Lab 3D printers
The Bambu Lab AMS 2 Pro is more than just a filament management system—it’s a game-changer for multi-color and multi-material 3D printing designed to streamline multi-color and multi-material 3D printing while addressing common filament management challenges, such as moisture control, through integrated drying functionality. The AMS 2 Pro is compatible with a range of Bambu Lab printers, including the H2D, X1 Series, and P1 Series, and is a standard inclusion in the H2D AMS Combo and H2D Laser Full Combo configurations. This AMS model offers unparalleled performance with features tailored for efficiency and quality:
- Multi-Color Printing with Up to 24 Colors: Connect up to 4 AMS 2 Pro units and 8 AMS HT units to manage 24 filaments, ideal for vibrant and intricate designs.
- Active Drying at 65°C: Protect your filaments from moisture with built-in drying modules, ensuring high-quality prints even with hygroscopic materials like PETG or nylon.
- 60% Faster Filament Feeding: A permanent magnet synchronous servo motor reduces filament change times, saving approximately 10 minutes per 100 changes.
| | |
- Hassle-Free Maintenance: Tool-free access to filament tubes makes maintenance quick and easy.
| | - Broad Compatibility: Works seamlessly with Bambu Lab H2D, X1, and P1 Series printers.
|
 | |  |
​
Advanced Features of the AMS Pro 2:
- RFID synchronization for Bambu Lab filaments
- Electro-magnetic air vents for efficient drying and air-tight storage
- Auto-rotate drying for consistent results
- Real-time temperature and humidity detection
|
Note
It is recommended to select the appropriate accessories in the additional options section (Bambu Lab AMS 2 Pro Upgrade Kit), depending on the printer model and the specific application.
The AMS supports spools from 50 to 68 mm wide and approximately 200 mm in diameter. When using the AMS, we recommend that you use Bambu filament, which has been thoroughly tested to work with the AMS. If you purchase a single AMS unit, it will come with a filament pad. If you plan to connect several AMS units together, you will need to purchase the AMS hub.
Avoid using soft materials with the AMS as they can get stuck. These include TPE, TPU or wet PVA. Filaments that are phosphorescent, particle-infused, or contain carbon or glass fibres that can be brittle and break inside the AMS, or abrasive and wear out internal parts prematurely. BambuLabs PA-CF and PAHT-CF have however been designed and tested to be compatible with the AMS.
Please avoid using cardboard reels with the AMS. The rollers inside the AMS control the rotation of the coils through the friction created between the edge of the plastic coil and the rubber rollers. Cardboard reels offer minimal friction, can tear or have deformed edges, and will therefore slip or jam, causing failure or damage to the AMS.
If you want to know more about AMS, see our Wiki article for an introduction, as well as our other articles on the subject.
FAQ – Frequently Asked Questions About the Bambu Lab AMS 2 Pro
1. Which printers are compatible with the AMS 2 Pro?
It’s compatible with Bambu Lab H2D, X1, and P1 Series printers.
2. Can I dry filaments while printing with the AMS 2 Pro?
Yes, but only for idle units. Units involved in active printing or auto-refill cannot dry simultaneously.
3. What filaments can I use with the AMS 2 Pro?
It supports PLA, PETG, ABS, ASA, PET, PA, PC, and more, but not soft (e.g., TPE, generic TPU) or abrasive (e.g., carbon fiber-filled) filaments.
4. Do I need an external power adapter?
For X1/P1 owners, an optional adapter is required to power the filament drying function of the Bambu Lab AMS 2 Pro. Since drying takes time and multiple adapters are rarely needed simultaneously, this optional adapter helps lower costs. For H2D owners, the H2D can directly power the drying function of any connected AMS 2 Pro, so no adapter is needed unless you plan to dry filaments across multiple AMS 2 Pro units at once.
Unleash your creativity with the AMS 2 Pro’s ability to handle up to 24 colors in a single print. Create complex, multi-color models like figurines, decorations, or educational tools with ease. The system also supports multi-material printing, allowing you to combine materials like PLA for the main body and PVA for supports, simplifying post-processing and enhancing print quality. Don’t miss the chance to elevate your 3D printing experience with the Bambu Lab AMS 2 Pro. Add it to your cart now and start creating stunning multi-color and multi-material prints with ease. You have more questions? Contact our team for personalized assistance.
N°1 European E-Shop for 3D Printing and scanning
