» Bambu Lab PLA Aero filament 1Kg (2 colors)

Bambu Lab PLA Aero filament 1Kg (2 colors)

Name: Bambu Lab PLA Aero filament 1Kg (2 colors)
Brand: Bambu Lab
SKU: 7036
Price: 50.39 EUR
Availability: InStock

50.39€ Incl Tax

Product available

Printing 3D RC Planes
Relatively tough
Easy to paint, matte texture
1.75 mm / 1kg

Colors *

Weight *

Please fill all required fields

Quantity :

Add to cart

Request a quotation

description

Technical Data Sheet

Contents of order

Documentation

Notice

PLA Aero filament with Bambu Lab spool

Bambu PLA Aero filament presents low density and light weight by foaming at high temperatures during printing and creating small holes inside the prints. It's the perfect choice for light-weight and energy-saving prints, including unmanned aerial vehicles (UAVs), aerodynamic models, and gliders. The materials of PLA Aero have high requirements for material drying and parameter settings. Please carefully read Instructions for printing aircraft model with foaming PLA (PLA Aero) before starting the printing process.

Low Density and Light Weight

Bambu PLA Aero has almost the same filament density as regular PLA, while the prints density is only 50% to 80%. When printing models of the same volume with same infil rates, PLA Aero is about half the weight of PLA Basic.

Controllable Model Density

Achieve lower density of the prints by increasing printing temperature and lowering flow rate. The average density of prints will vary with changes in parameters such as actual printing temperature, flow rate ratio, printing speed, model size, wall thickness and infill density.

Matte Finish For Easy Coloring

Bambu PLA Aero provides an easy-to-color matte surface texture with better dyeing results as compared to PLA Basic.

Parameters Comparison

	PLA Basic	PLA Aero
Printing Temperature	190 - 230 ℃	210 - 260 ℃
Printing Speed	< 300 mm/s	< 250 mm/s
Flow Rate Ratio	0.96 - 1	0.5 - 0.8
Filament Density	1.24 g/cm³	1.21 g/cm³
Foaming Rate	/	0 - 120%
Prints Density	1.21 kg/m³	0.55 - 1.05 kg/m³

RFID for intelligent printing

All the printing parameters are integrated into the RFID, which can be read via our AMS (Automatic Material System).

Load and print! No more tedious set-up steps.

description

Technical Data Sheet

Contents of order

Documentation

Notice

Properties	Data
Drying parameters before printing	55 °C, 8 hours
Printing and maintaining container humidity	Blast Drying Oven: 55 °C, 8 h X1 Series Printer Heatbed: 65 - 75 °C, 12 h
Nozzle temperature	210 - 260 °C
Bed temperature (with PVP adhesive)	35 - 45 °C
Print speed	< 250 mm/s
Density	1.21 g/cm³
Softening temperature Vicar	56 °C
Thermal deviation temperature	50 °C
Melting temperature	154 °C
Melt index	5.0 +/- 0.6 g/10 min
Tensile strength	26 +/- 2 MPa
Elongation at break	2.2 +/- 0.8 %
Bending modulus	1960 +/- 110 MPa
Bending strength	42 +/- 3 MPa
Impact Strength	24.5 +/- 1.7 kJ/m²