Filament Bambu Lab Support for ABS 500g

Filament BambuLab Support for ABS

Enhance your ABS printing experience with our innovative support material. Designed for effortless printing and hassle-free removal, this material ensures a flawless support interface every time. Fully compatible with the AMS systems, it streamlines your ABS printing process from start to finish. Say goodbye to tedious support removal and enjoy a smoother, more efficient workflow!

​

Easy Support Removal

Specially formulated for ABS, our support material adheres precisely to the ABS surface, allowing for easy support removal. This streamlines your post-processing work, ensuring a more efficient workflow.

Superior Support Interface Quality

Support for ABS enables a 0 Top Z distance and 0 Top interface spacing when printing, ensuring a scar free support surface. This enhances the sharpness of details, improving the overall appearance and integrity of your final prints.

Printing Tips

• ABS holder is soluble in limonene. Please observe all safety and application regulations.

• Pungent, unpleasant odors may develop during printing. Make sure your printer is closed and placed in a well-ventilated area.

• When layer thickness is required, we recommend increasing the rinsing volume to over 800 mm³. If rinsing is not complete, it may reduce the adhesion of the pattern layer to surfaces lying on the same horizontal plane as the support surface.

• By increasing the “initial layer speed”, it is possible to achieve a more peelable substrate. However, this increases the risk of deformation.

• Dry before use for best print quality. Drying conditions: 80℃ for 4 hours in the blow-drying oven; 85 - 95 ℃ for 6 hours in the X1 series heated bed.

Accessories compatibility

Parameters Comparison

What's in the Box

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.