Name: Flashforge Filament PLA Silk 1,75mm 1kg (2 colors)
Brand: Flashforge
SKU: 6064
Price: 28.78 EUR
Availability: InStock

Description

Flashforge PLA Silk filament is a high performance PLA material with great strength and toughness. It allows parts to be printed with a smooth, silky surface that reflects light. It also has low shrinkage, which effectively reduces warping and cracking problems. Full mechanical winding and strict manual review have been repeated many times to ensure the filament is tidy and less tangled. Larger inner diameter spool design makes feeding smoother.

Compatible with

Flashforge Adventurer 3 *
Flashforge Adventurer 4
Flashforge Creator 3
Flashforge Creator 3 Pro
Flashforge Creator 4
Most 3D printers equipped with a heatbed

*Only the 500g spool can be installed in the Adventurer 3 due to the compact size of the machine.

Recommandation

The recommended extrusion temperature for Flashforge PLA filament is between 190°C and 220°C with a print speed of 40-60mm/s.

If your 3D printer has a heated bed, set the temperature to around 25°C to 60°C. A heated bed is not necessary for PLA prints, but it can be beneficial.

If your 3D printer has a fan, turn it on while printing.

Make sure the first layer of material has sufficient adhesion. A thin layer of glue from a water washable glue stick or a layer of masking tape will increase adhesion.

Technical specifications

Properties	Metric	Standard
Tensile strength	≥ 60 MPa	ISO 527
Breaking stress	≥ 2500 MPa	ISO 527
Elongation at Break	≥ 3%	ISO 527
Impact Strenght	≥ 16 J/m	ISO 179