Intamsys Filament ULTEM (PEI) 1010 1,75mm (500g / 1kg)

Aftersales

Service

Delivery in
48H

• This experimental 3D filament requires demanding 3D printing conditions including an extruder that is capable of heating up to 400°C and a print chamber that is thermally controlled to a minimum of 220°C.

• This filament material is sensitive to humidity. After opening, it should be stored in a dry and light-free environment. For optimal use of the filament and a good surface finish, we recommend drying the filament at 150 °C for 5 hours.

• Remember to prepare your printing plate with adhesive specially designed for high-temperature materials such as PEEK and PEI (see the nano polymer adhesive: Vision Miner Nano Polymer).

• Once your 3D print is complete, it is a good idea to unload the filament from the 3D machine and store it in a dry, light-free place. Also, remember to clean your nozzle to eliminate any blockages or defects for the next print.

   

Tensile Strength

ASTM D638

Elongation at break

3.3 %

ASTM D638

Heat Deflection Temperature

207 °C

ASTM D648

Glass transition Temperature

215 °C

DSC, 10 °C/min

Density

 ASTM D792