Intamsys Filament ULTEM (PEI) 9085 1,75mm Natural (500g / 1kg)

Aftersales

Service

Delivery in
48H

• This experimental filament requires complex 3D printing conditions, in particular with an extruder capable of heating up to 400 °C and a thermo-regulated printing chamber.

​

• It is sensitive to humidity. After opening the package, it is to be stored in a dry and dark environment. For optimal use of the filament and a good surface finish, we recommend using the drying system at 150 °C for 5 hours.

​

• Remember to prepare your tray by putting the Kapton sheet or the PVP collar in order to avoid a possible adhesion of the filament.

​

• Once your print is complete, remember to clean your nozzle to remove any blockages or defects for the next 3D printing.

Tensile Strength

ASTM D638

Elongation at break

3.3 %

ASTM D638

Heat Deflection Temperature

207 °C

ASTM D648

Glass transition Temperature

215 °C

DSC, 10 °C/min

Density

 ASTM D792