Sprintray DLP Dental Model resin shows all the minutiae of detail due to its color (green). It is a highly accurate and easy-to-use resin that is created specifically for use as a visual aid and is perfect for dental modeling.
To consume preferably until the end of 2017.
The resin can be used longer than the optimal date, depending on the recommended conditions of handling, use, and storage. Keep the materials tightly closed in a dry, cool and dark (out of sunlight) place.
Note: The new Sprintray resins are compatible with Rayware Software version 3.4 or higher. It is also necessary to have a dongle, supplied with recently purchased Moonray 3D printers. If you are not in possession of a recent Moonray 3D printer, and would like to receive a dongle, contact us at firstname.lastname@example.org or email@example.com.
We recommend you to shake and mix the resin well before using.
See also: Dlab resin mixer
Example of 3D printed model
with Sprintray Dental model resin
For obtaining best results with this resin,
please follow these instructions as below exactly as described once the model is printed.
Clean your 3D printed part using 99% isopropyl alcohol and a soft brush. We recommend either 5 minutes in an ultrasonic cleaner or 10 minutes submerged in alcohol.
Rinse your printed part using fresh isopropyl alcohol twice.
Dry your printed part with compressed air.
Post-cure your printed part in a 100W curing chamber for at least 30 minutes, or in a 120W curing chamber for at least 10 minutes.
| ||SprintRay SP-RM Resin|
39.70 - 43.29 MPa
|Elongation at Break|
17.53 - 22.11 %
1528.05 - 1567.92 MPa
1.24 g / cm3
70.2 - 80.7 HD