» » » (Promo) SprintRay DLP Dental Model Resin Green

(Promo) SprintRay DLP Dental Model Resin Green

(Promo) SprintRay DLP Dental Model Resin Green
See larger image
149.00€ +Tx 74.50€ +Tx
Save 50%!
Product available
Quantity : 
Add to quotation requests







Delivery in






Sprintray DLP Dental Model resin shows all the minutiae of detail due to its color (green). It is a highly accurate and easy-to-use resin that is created specifically for use as a visual aid and is perfect for dental modeling.


To consume preferably until June 2020.

The resin can be used longer than the optimal date, depending on the handling, use, and storage conditions for which it is recommended. Keep it tightly closed in a dry, cool, and well-ventilated place. Before using it, be sure to shake it well for several minutes. If there are bubbles due to agitation, pour the resin into the resin tank and leave it for about 20-30 minutes for the bubbles to disappear.


Compatible with

Note: The new Sprintray resins are compatible with Rayware Software version 3.4 or higher. It is also necessary to have a dongle, supplied with recently purchased Moonray 3D printers. If you are not in possession of a recent Moonray 3D printer, and would like to receive a dongle, contact us at nicolas@machines-3d.com or info@machines-3d.com.



We recommend you to shake and mix the resin well before using.

See also: Dlab resin mixer


Example of 3D printed model
with Sprintray Dental model resin





For obtaining best results with this resin,

please follow these instructions as below exactly as described once the model is printed.






Clean your 3D printed part using 99% isopropyl alcohol and a soft brush. We recommend either 5 minutes in an ultrasonic cleaner or 10 minutes submerged in alcohol.




Rinse your printed part using fresh isopropyl alcohol twice.




Dry your printed part with compressed air.




Post-cure your printed part in a 100W curing chamber for at least 30 minutes, or in a 120W curing chamber for at least 10 minutes.  









Technical specifications



 SprintRay SP-RM Resin

Tensile strength

39.70 - 43.29 MPa

Elongation at Break

17.53 - 22.11 %

Flexural strength

1528.05 - 1567.92 MPa 


363 mPa.s 


1.24 g / cm3


70.2 - 80.7 HD

Quantity1 Liter








Content of order


     • 1 bottle of DLP Sprintray resin Dental Model Green