(PROMO) SprintRay DLP Resin Dental Casting Green

(PROMO) SprintRay DLP Resin Dental Casting Green
See larger image
322.80€ Incl Tax 161.40€ Incl Tax
Save 50%!
Product available
Quantity : 
Add to cart
Request a quotation







Delivery in





Sprintray DLP Dental Casting Green resin is specially designed to print your bridges, crowns and stellite frames, it only remains to cylinder and cast with the metals you need.



Compatible with

Note: The new Sprintray resins are compatible with Rayware Software version 3.4 or higher. It is also necessary to have a dongle, supplied with recently purchased Moonray 3D printers. If you are not in possession of a recent Moonray 3D printer, and would like to receive a dongle, contact us at nicolas@machines-3d.com or info@machines-3d.com.



We recommend you to shake and mix the resin well before using.

See also: Dlab resin mixer









For obtaining best results with this resin,

please follow these instructions as below exactly as described once the model is printed.






Clean your 3D printed part using 99% isopropyl alcohol and a soft brush. We recommend either 5 minutes in an ultrasonic cleaner or 10 minutes submerged in alcohol.




Rinse your printed part using fresh isopropyl alcohol twice.




Dry your printed part with compressed air.




Post-cure your printed part in a 100W curing chamber for at least 30 minutes, or in a 120W curing chamber for at least 10 minutes.  









Technical specifications



 SprintRay SP-RW Resin

Tensile strength

35.43 - 42.58 MPa

Elongation at Break

10.76 - 12.28 %

Flexural strength

1197.12 - 1368.90 MPa 


55.8 mPa.s 


1.036 g / cm3


72 - 79.5 HD

Quantity1 Liter
Export in pdf


Content of order


     • 1 bottle of DLP Sprintray resin Dental Casting Green