» » » Smooth PEI Plate Bambu Lab X1 série / P1P

Smooth PEI Plate Bambu Lab X1 série / P1P

Smooth PEI Plate Bambu Lab X1 série / P1P
See larger image
40.79€ Incl Tax

Available Product available
Quantity : 
+
-

Add to cart
Request a quotation

description
Product Specification
Recommended Settings
Content of order
Notice

 

High Z-axis Precision Printing

The use of a Smooth PEI Plate contributes to improved Z-axis precision during the printing process, ensuring greater accuracy and consistency in the vertical dimension. These qualities make the Smooth PEI Plate an excellent choice for printing parts that demand a high level of fit accuracy, where precise alignment and tight tolerances are crucial.

 

Surface Finish

Smooth and Matte Surface Finish

The use of a specially selected matte PEI sheet can impart a smooth and matte texture to the bottom surface of the printed object, enhancing its overall appearance.

 

 

Compatible with Various Filaments

PEI enables printing not only with common materials such as PLA, TPU, PETG, but also with materials that require high temperatures like ABS and Nylon.

 

Note: Please apply glue to prevent the sheet from tearing if printing with filaments other than PLA.

 

 

Reliable Magnetic Adhesion to Prevent Warping

The Bambu Smooth PEI Plate features a 0.5mm-thick spring steel plate that enhances magnetic adhesion. This helps to prevent warping and ensure optimal print quality during 3D printing. It also helps when printing larger models with materials that are prone to warping such as ABS, PC, and Nylon.

 

 

 

Considerations

Please note that with the Smooth PEI Plate on the A1 there is a higher risk the plate curling from the corners, or the printed models to detach from the plate. This is caused by the thicker Smooth PEI applied to the plate, which will increase the distance from the bed magnets and lower the magnetic attraction.

If bubbles appear on the bottom of the sheet, heating it on the heatbed at a temperature of no less than 80 degrees for several hours can be helpful in eliminating the bubbles.

Deposition of dust and grease on the build plate decrease adhesion. It is recommended to regularly clean the surface with detergent and water to to maintain best adhesion.

Do not clean the Smooth PEI with Acetone, as it will damage the PEI surface.

Always wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.

Carefully sanding the surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.

The Smooth PEI plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.

 

Recommended Settings

Please note that other slicer settings might need to be adjusted based on the printed model and the filament requirements

 

MaterialsHeatbed TemperatureGlue Stick Required?
PLA/PLA-CF/PLA-GF45~60℃No
PETG/PETG-CF60~80℃Glue Stick/Liquid Glue
ABS (not for A1 mini)90~100℃Glue Stick/Liquid Glue
ASA (not for A1 mini)90~100℃Glue Stick/Liquid Glue
TPU35~45℃Glue Stick/Liquid Glue
PVA45~60℃Glue Stick/Liquid Glue
PC/PC-CF (not for A1 mini)90~110℃Glue Stick
PA/PA-CF/PAHT-CF (not for A1 mini)90~110℃Glue Stick
PET-CF (not for A1 mini)80~100℃Glue Stick/Liquid Glue
Back to top
description
Product Specification
Recommended Settings
Content of order
Notice

 

 

 

Surface temperature resistance

Up to 200 °C

Usable print size

256 x 256 mm

High-temp Plate sticker thickness

0.3 mm

Flexible spring steel thickness

0.5 mm

Package Weight

320 g

Package size

290 x 290 x 4 mm

 

 

 

Back to top
description
Product Specification
Recommended Settings
Content of order
Notice

 

 

High-Temperature Plate

 

 

 Hotend temperature

Glue stick required ?

Upper Glass Cover Plate Removed ?

PLA/PLA-CF/PLA-GF

45 - 60 °CNonOui

ABS

90 - 100 °CNonNon
PETG60 - 80 °CNonNon

TPU

35 - 45 °COuiOui
ASA90 - 100 °CNonNon
PVA45 - 60 °CNonOui

PC/PC-CF

90 - 110 °COuiNon

PA/PA-CF/PAHT-CF

90 - 110 °COuiNon

 

 

 

 

Engineering Plate (normal plate)

 

 

 Hotend Temperature

Glue Stick Required ?

Upper Glass Cover Plate Removed ?

ABS

100 - 110 °CYesNo
PETG70 - 80 °CRecommendedYes

TPU

30 - 35 °C

Recommended

No

PC/PC-CF

100 - 110 °CYesNo

PA/PA-CF/PAHT-CF

100 - 110 °CYesNo

 

 

 

 

Back to top
description
Product Specification
Recommended Settings
Content of order
Notice

 

  • 1 Bambu High Temperature Plate

 

 

 

Back to top
description
Product Specification
Recommended Settings
Content of order
Notice
Customer reviews
Number's review: 1
Product rating: 5/5 note
Trusted certificate
Customer reviews 24/11/2023
note
Qualité top
Back to top
In the same category
Customers have also purchased
Products viewed
< >
Back to top
In the same category
Customers have also purchased
Products viewed
In the same category
Customers have also purchased
Products viewed
< >
Back to top
The administrator of the site is online now! Talk - ask your questions to webmaster