» » » SprintRay DLP Resin Surgical guide 2

SprintRay DLP Resin Surgical guide 2

SprintRay DLP Resin Surgical guide 2
See larger image
249.00€ +Tx
Product available
Quantity : 
Add to quotation requests







Delivery in







Sprintray Surgical Guide Resin allows you to print accurate surgical guides and partial clear aligners. It is a biocompatible, FDA-compliant material, has higher flexural strength and flexural modulus than competing brands, plus comparably low viscosity for easy mixing. 



Compatible with



We recommend you to shake and mix the resin well before using.

See also: Dlab resin mixer








Example of 3D printed models with Sprintray resin surgical guide




Photographie : Dr. Cory Glenn, DDS






For obtaining best results with this resin,

please follow these instructions as below exactly as described once the model is printed.






Clean your 3D printed part using 99% isopropyl alcohol and a soft brush. We recommend either 5 minutes in an ultrasonic cleaner or 10 minutes submerged in alcohol.




Rinse your printed part using fresh isopropyl alcohol twice.




Dry your printed part with compressed air.




Post-cure your printed part in a 100W curing chamber for at least 30 minutes, or in a 120W curing chamber for at least 10 minutes.  










Content of order


     • 1 bottle of DLP Sprintray resin Surgical Guide 2