Name: SprintRay DLP Resin Try-In
Brand: Sprintray
SKU: 4383
Price: 358.80 EUR
Availability: InStock

Description

SprintRay’s biocompatible try-in resin can be rapidly printed to check bite registration and occlusion of dentures. This material is able to be printed as monolithic or as a baseplate combined with individual tooth setup for maximum flexibility.

Compatible with

We recommend you to shake and mix the resin well before using.

See also: Dlab resin mixer

Instructions

For obtaining best results with this resin,

please follow these instructions as below exactly as described once the model is printed.

1	Clean your 3D printed part using 99% isopropyl alcohol and a soft brush. We recommend either 5 minutes in an ultrasonic cleaner or 10 minutes submerged in alcohol.
2	Rinse your printed part using fresh isopropyl alcohol twice.
3	Dry your printed part with compressed air.
4	Post-cure your printed part in a 100W curing chamber for at least 30 minutes, or in a 120W curing chamber for at least 10 minutes.

Content of order

• 1 bottle of DLP Sprintray resin Try-In

Documentation

Safety data sheet (EN)

Software RayWare Version 3.40