» » » SprintRay DLP Try-In

SprintRay DLP Try-In

SprintRay DLP Try-In
See larger image
299.00€ +Tx
Product available
Quantity : 
Add to quotation requests







Delivery in




SprintRay’s biocompatible try-in resin can be rapidly printed to check bite registration and occlusion of dentures. This material is able to be printed as monolithic or as a baseplate combined with individual tooth setup for maximum flexibility.


Compatible with



We recommend you to shake and mix the resin well before using.

See also: Dlab resin mixer











For obtaining best results with this resin,

please follow these instructions as below exactly as described once the model is printed.






Clean your 3D printed part using 99% isopropyl alcohol and a soft brush. We recommend either 5 minutes in an ultrasonic cleaner or 10 minutes submerged in alcohol.




Rinse your printed part using fresh isopropyl alcohol twice.




Dry your printed part with compressed air.




Post-cure your printed part in a 100W curing chamber for at least 30 minutes, or in a 120W curing chamber for at least 10 minutes.  










Content of order


     • 1 bottle of DLP Sprintray resin Try-In


The administrator of the site is online now! Talk - ask your questions to webmaster