Filament PETG Basic Refill Bambu Lab
Known for its impact and water resistance, high flexibility and strong adhesion to the coating, Bambu PETG Basic is ideal for printing tools (vices, turnbuckles, bag clips), toys (Frisbees, boomerangs), water containers (bottles, watering cans) and outdoor items (flower pots, bottle cages) that require long-term exposure and are impact resistant.
Less oozing, spinning and clumping
Improved by a modified formula, Bambu PETG Basic reduces the problems of clumping, bleeding and spinning during printing.
Excellent light transmission
Thanks to its exceptional light transmission, Bambu PETG Basic can be used to obtain translucent or even transparent aspects with specific printing parameters.
Superior robustness and impact resistance An improvement on ordinary PLA materials for high flexibility and excellent impact resistance.
Print outdoor models with ease
The waterproof, weatherproof solution for your decoration and garden furniture needs.
RFID for intelligent printing
All the printing parameters are integrated into the RFID, which can be read via our AMS (Automatic Material System).
Load and print! No more tedious set-up steps.
Print your own spool now
The Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the built-in files!
If you do not have the reel model in your printer, please click here to download.
Instructions for the printed spool
When you have finished printing, you will have a wide part (1x), a narrow part (1x) and a spacer (2x). Find the locator (a small block on the wide part). Align it with the notch on the inner ring of the filament roll. Insert the wide part into the filament roll. Step 1. Insert the narrow piece and align the groove of each piece inside the spool until it is firmly pressed into the wide piece.
Step 2. Once firmly seated in the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 1. Make sure the spacer is installed inside the coil (under the triangle).
Step 2. Tear and remove the plastic strips.
Installing the filament in the spool
VIDEO