» FILAMENTS

Bambu Lab Basic PETG Refill filament 1Kg (6 colors)

29.88€ Incl Tax

Not available Not available

Notify me when this article is in stock

Refill version, without reel
Impact and water resistance
1.75 mm / 1kg

Colors *

Weight *

Please fill all required fields
Quantity : 
+
-

Request a quotation

description
Technical Data Sheet
Contents of order
Documentation
Notice

 

 

Filament PETG Basic Refill Bambu Lab

 

 

Known for its impact and water resistance, high flexibility and strong adhesion to the coating, Bambu PETG Basic is ideal for printing tools (vices, turnbuckles, bag clips), toys (Frisbees, boomerangs), water containers (bottles, watering cans) and outdoor items (flower pots, bottle cages) that require long-term exposure and are impact resistant.

 

 

 

 

 

 

Less oozing, spinning and clumping

 

Improved by a modified formula, Bambu PETG Basic reduces the problems of clumping, bleeding and spinning during printing.

 

 

 

 

 

 

Excellent light transmission

 

Thanks to its exceptional light transmission, Bambu PETG Basic can be used to obtain translucent or even transparent aspects with specific printing parameters.

 

 

 

 

 

Superior robustness and impact resistance

An improvement on ordinary PLA materials for high flexibility and excellent impact resistance.

 

 

 

 

 

 

 

 

Print outdoor models with ease

 

The waterproof, weatherproof solution for your decoration and garden furniture needs.

 

 

 

 

 

 

 

 

 

 

RFID for intelligent printing

 

All the printing parameters are integrated into the RFID, which can be read via our AMS (Automatic Material System).

Load and print! No more tedious set-up steps.

 

 

 

 

 

 

 

 

 

Print your own spool now

 

The Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the built-in files!

 

 

 

 

If you do not have the reel model in your printer, please click here to download.

 

 

 

 

 

 

 

 

 

Instructions for the printed spool

 

 

 
When you have finished printing, you will have a wide part (1x), a narrow part (1x) and a spacer (2x). Find the locator (a small block on the wide part). Align it with the notch on the inner ring of the filament roll. Insert the wide part into the filament roll.
 

Step 1. Insert the narrow piece and align the groove of each piece inside the spool until it is firmly pressed into the wide piece.

 

Step 2. Once firmly seated in the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

 

Step 1. Make sure the spacer is installed inside the coil (under the triangle).

 

Step 2. Tear and remove the plastic strips.

 

 

 

 

 


 

 

Installing the filament in the spool

 

 

 

 

 

Back to top
description
Technical Data Sheet
Contents of order
Documentation
Notice

 

 

PropertiesData
Drying parameters before printing65 °C, 8 h

Printing and maintaining container humidity

< 20% RH (Sealed, with Desiccant)
Nozzle temperature240 - 270 °C
Bed temperature (with PVP adhesive)65 - 75 °C
Print speed< 200 mm/s
Density1.25 g/cm³
Softening temperature Vicar78 °C
Thermal deviation temperature69 °C
Melting temperature225 °C
Melting index18.6 +/- 2.2 g/10 min
Tensile strength48 +/- 5 MPa
Elongation at break11.2 +/- 0.8 %
Flexural modulus1790 +/- 120 MPa
Flexural strength81 +/- 4 MPa
Shock resistance52.7 +/- 2.4 kJ/m²

 

 

 

Back to top
description
Technical Data Sheet
Contents of order
Documentation
Notice

 

 

     • 1 Bambu Lab PETG Basic filament 1,75mm 1Kg - Recharge

 

     • Instructions and spool sticker

 

 

 

Back to top
description
Technical Data Sheet
Contents of order
Documentation
Notice
description
Technical Data Sheet
Contents of order
Documentation
Notice
Back to top
In the same category
Customers have also purchased
Products viewed
< >
Back to top
In the same category
Customers have also purchased
Products viewed
In the same category
Customers have also purchased
Products viewed
< >
Back to top
The administrator of the site is online now! Talk - ask your questions to webmaster