» » 3DXTech Filament AMIDEX PA6-30GF

3DXTech Filament AMIDEX PA6-30GF

3DXTech Filament AMIDEX PA6-30GF
See larger image
78.00€ +Tx
Product available
Quantity : 
+
-
Add to quotation requests

 

 

Aftersales

Service

 

 

Delivery in
48H


 

 


Description

 

The AMIDEX™ PA6-30GF from 3DXTech (1.75mm 750g - Black) is a filament composed of a Polyamide copolymer (Nylon 6 / PA6) reinforced with 30% glass fibers. Made in the USA from high-quality fiberglass, the AMIDEX™ PA6-30GF is nothing less than an industrial-grade beast!  This filament has been formulated to be exceptionally stiff and strong - without being brittle. 

 

 

 

Compatible with

 

 

 

 

 

 

About 3DXTech

 

3DXTech is an American company based in Michigan. It produces in its Grand Rapids plant industrial-quality filaments capable of meeting the high demands and needs of scientists and engineers. Their high-performance plastics are used in advanced fields such as aerospace, automotive, rail, food, as well as in the laboratories and assembly lines of many manufacturers around the world.

 

 

 

 

 

 

 

 

 

 

 

Advice for AMIDEX™ PA6-30GF

 

 

 

  • Ideal for structural engineering applications
  • Exceptionally stiff and strong - without being brittle
  • Excellent chemical resistance - suitable for automotive and industrial applications
  • High thermal properties - applications up to 150c in service depending on the mechanical loads applied
  • Improved dimensional stability - glass fibers reduce shrinkage, lifting, and warping
  • Very good adhesion of the layers

 

 

 

 

 

 

 

 

Example of printed parts with l'AMIDEX™ PA6-30GF filament

 

 

 

 

 

 

 

 

 

 

 

3DXTech best printing parameters

 

 

 

Filament

        Hotend        

Print bedDrying Temp (Max) Drying Time (Min) 
THERMAX HTS350 - 380 °C120 - 160 °C120 °C4H
THERMAX PPSU360 - 390°C

140 - 160°C

120 °C4H
CARBONX CF-Nylon PA6240 - 270°C80 - 100°C90 °C4H
CARBONX CF-PEKK-A 345 - 375°C 120 - 140 °C120 °C4H
CARBONX CF-PETG230 à 260°C70 - 90 °C65 °C2 - 4H
AMIDEX PA6-30GF260-280°C60 - 75 °C90 °C4H

* The present information is given as an indication, provided by the manufacturer. Nozzle and heating plate temperatures may vary depending on the 3D printer used.

 

 

 

 

 

 

 

 

Technical specifications

 

 

PropertiesNotes
Extruder temp260-280°C
Bed temp60 - 75°C
Bed prepLacquer on a clean glass plate, perforated board, Polyetherimide sheet (PEI)
NozzleWe recommend an exit of at least 0.40 mm. 
Layer height

 

The ideal layer height is 60% of the nozzle diameter. We do not recommend printing layers smaller than 0.25 mm with glass fibers.  A height of less than 0.25 mm can create too much back pressure in the extrusion chamber and lead to poor loading, blockages, rattling at the drive gear, and a notch in the filament

 

Nozzle wear

 

Fiberglass is very abrasive and will quickly wear out a brass nozzle. We strongly recommend the use of a hardened steel nozzle

 

Diameter1,75 mm (+/- 0,05 mm)
Max Drying Temp90°C
Min Drying Time4 hours
Drying Nylon

 

Anyone who prints with nylon knows how quickly it can absorb moisture and the consequences this has on the quality of your print. We recommend drying nylon at 90°C for at least 4 hours, but this is a starting point.  Saturated nylon can take more than 24 hours to dry enough to make decent prints. Store the material in a dry place during printing and between print jobs to facilitate drying

 

Nylon over-dried

 

One thing to note is that over-dried nylon can be more difficult to dry and handle.  In fact, nylon likes a little moisture, otherwise, it is brittle and more difficult to handle.  Printing with nylon is so much fun!

 


 

 

 

 

 

Content of the order

 

     • 1 spool of 3DXTech - AMIDEX PA6-30GF - 1.75mm 750g - Black filament