» FILAMENTS

Bambu Lab PLA Aero filament 1Kg (2 colors)

50.39€ Incl Tax

Available Product available

Printing 3D RC Planes
Relatively tough
Easy to paint, matte texture
1.75 mm / 1kg

Colors *

Weight *

Please fill all required fields
Quantity : 
+
-

Add to cart
Request a quotation

description
Technical Data Sheet
Contents of order
Documentation
Notice

 

 

PLA Aero filament with Bambu Lab spool

 

Bambu PLA Aero filament presents low density and light weight by foaming at high temperatures during printing and creating small holes inside the prints. It's the perfect choice for light-weight and energy-saving prints, including unmanned aerial vehicles (UAVs), aerodynamic models, and gliders. The materials of PLA Aero have high requirements for material drying and parameter settings. Please carefully read Instructions for printing aircraft model with foaming PLA (PLA Aero) before starting the printing process.

 

 

 

 

 

 

 

Low Density and Light Weight

 

Bambu PLA Aero has almost the same filament density as regular PLA, while the prints density is only 50% to 80%. When printing models of the same volume with same infil rates, PLA Aero is about half the weight of PLA Basic.

 

 

 

 

 

 

Controllable Model Density

 

Achieve lower density of the prints by increasing printing temperature and lowering flow rate. The average density of prints will vary with changes in parameters such as actual printing temperature, flow rate ratio, printing speed, model size, wall thickness and infill density.

 

 

 

 

 

 

 

Matte Finish For Easy Coloring

 

 

Bambu PLA Aero provides an easy-to-color matte surface texture with better dyeing results as compared to PLA Basic.

 

 

 

 

 

 

 

 

 

 

Parameters Comparison

 

 

 PLA Basic PLA Aero
Printing Temperature 190 - 230 ℃ 210 - 260 ℃
Printing Speed < 300 mm/s < 250 mm/s
Flow Rate Ratio 0.96 - 1 0.5 - 0.8
Filament Density 1.24 g/cm³ 1.21 g/cm³
Foaming Rate / 0 - 120%
Prints Density 1.21 kg/m³ 0.55 - 1.05 kg/m³

 

 

 

 

 

 

 

RFID for intelligent printing

 

All the printing parameters are integrated into the RFID, which can be read via our AMS (Automatic Material System).

Load and print! No more tedious set-up steps.

 

 

 

 

 

 

Back to top
description
Technical Data Sheet
Contents of order
Documentation
Notice

 

 

PropertiesData
Drying parameters before printing55 °C, 8 hours

Printing and maintaining container humidity

Blast Drying Oven: 55 °C, 8 h

X1 Series Printer Heatbed: 65 - 75 °C, 12 h

Nozzle temperature210 - 260 °C
Bed temperature (with PVP adhesive)35 - 45 °C
Print speed< 250 mm/s
Density1.21 g/cm³
Softening temperature Vicar56 °C
Thermal deviation temperature50 °C
Melting temperature154 °C
Melt index5.0 +/- 0.6 g/10 min
Tensile strength26 +/- 2 MPa
Elongation at break2.2 +/- 0.8 %
Bending modulus1960 +/- 110 MPa
Bending strength42 +/- 3 MPa
Impact Strength24.5 +/- 1.7 kJ/m²

 

 

 

Back to top
description
Technical Data Sheet
Contents of order
Documentation
Notice

 

 

     • 1 Spool of Bambu Lab PLA Aero 1,75mm 1Kg  

 

     • Instructions and spool sticker

 

 

 

Back to top
description
Technical Data Sheet
Contents of order
Documentation
Notice
description
Technical Data Sheet
Contents of order
Documentation
Notice
Back to top
In the same category
Customers have also purchased
Products viewed
< >
Back to top
In the same category
Customers have also purchased
Products viewed
In the same category
Customers have also purchased
Products viewed
< >
Back to top